Steering gear and add-on parts for the Bus

The Direct Link to the Road – The New Steering Box for Your VW Bus T2

Precise power transmission and maximum ease of movement are the be-all and end-all for a safe and direct driving feel in your classic – and should be in focus during every comprehensive restoration. When you steer the legendary VW Bus T2, you feel the pure mechanics and the road on every kilometer. Different components and adjustment work can be used here – depending on the wear pattern and your own demands on steering precision. In addition to daily compensation for road unevenness, a complete replacement of the play-free steering box after decades on the asphalt is also worthwhile. Then nothing stands in the way of a safe and course-stable classic car adventure. We reveal why the topic of steering box must concern every bus owner, what steps to observe during installation, and which versions come into question for your classic.

Why is the steering box an important step in steering revision?

Precision and absolute play-freedom form the base of the daily drive – only when the steering box is completely intact and precisely adjusted can the tie rods, the joints, and the steering wheel work harmoniously or the vehicle be safely kept in lane. It is not enough to ignore excessive steering play or jerky movements with the naked eye. While acute defects are not remedied in this way, progressive wear, dry running surfaces, and a dangerous loss of control continue to stubbornly destroy driving safety. For reliable driving behavior, you should therefore rely on a new steering box. This is checked for play-freedom and smooth-running mechanics during professional inspection.

When should I renew my steering box?

After heavy wear or with noticeable steering play! During the check on the lift or during steering overhaul, typical weak points are checked: too much play in the center position, escaping grease, or uneven power transmission. In addition, unnecessary safety risk and the unsafe feeling on winding country roads disappear if you rely on a fresh steering box in time, instead of continuing to stress outdated and worn-out original parts.

How does the installation of the steering box work?

These four belong to the basic equipment for the replacement:

• The new steering box including all necessary gaskets
• High-strength bolts and new locking nuts
• A matching special grease for optimal lubrication
• A calibrated torque wrench for exact tightening values

For most work, a well-equipped workshop with a lift is recommended as a basis. Prepare the assembly by cleanly loosening the steering column and freeing all contact surfaces from dirt. Install the steering box precisely according to manufacturer specifications and tighten all screw connections with the prescribed torque. After installing the new steering box, a professional wheel alignment is mandatory. Please note that you perform these fundamental works with the utmost care – otherwise the steering behavior suffers massively. After assembly, a thorough test drive is recommended.

Which steering box suits me?

Actually, asking a counter-question is impolite. But in order to choose the right steering components in terms of front axle, we want to know from you: Which application would you assign your T2 to? Do you drive the Bulli in everyday life, on extended trips with heavy luggage, or do you drive it sportily on winding mountain passes? Because for every driving profile there is the matching steering box.

• Series-faithful version: Your Bulli copes best with the original ratio. Whether standard use or classic car meeting: you have the authentic steering characteristic for original driving comfort.
• Overhauled original version: So that the steering harmonizes perfectly with all attachment parts even according to historical precedent, you should rely on professionally overhauled steering boxes. Paired with fresh grease, we say "Ade!" to imprecise steering play.
• New part version: For a uncompromising and durable repair, the choice of brand-new steering boxes is recommended. These guarantee maximum fitting accuracy and minimize wear for many years to come.