B plate for the Bus

B plate for the VW Bus T2 – nationality plate with the appropriate year

The B plate in this category is a nationality plate featuring the “B” marking and an additional year. The listed versions are made from aluminium and differ according to the year displayed on each plate. The category page lists individual variants for the years from 1947 through to 1970. This allows you to select the nationality plate specifically according to the desired year. If you are looking for a plate with the “B” marking and a particular year for your VW Bus T2, you should use the respective product designation as your guide. The focus is not on different technical functions, but on the B marking, the aluminium construction and the year displayed on the respective plate.

What characterises the B plate in this category?

The B plate is primarily defined by its design as a “B” nationality plate. The individual products follow the same basic principle and are distinguished from one another by their respective year. Versions are listed for 1947, 1948, 1949 and the following consecutive years through to 1970. Aluminium is specified as the material for the listed variants. These are therefore not different mechanical vehicle parts, but different year-specific versions of one clearly defined accessory. The most important selection criterion is consequently the year that should appear on the plate. When comparing several variants, you should carefully check the year stated in the respective product designation.

When should I inspect or replace a B plate?

Because the B plate is a visible accessory, you should pay particular attention to its external condition. If an existing plate is damaged or noticeably deformed, replacement may be appropriate. The same applies if the year displayed does not correspond to the desired year. When visually refurbishing your VW Bus T2, you can also check whether the existing aluminium nationality plate still matches the desired version. If you specifically want to use a different year, the corresponding variant must be selected. Since the category page lists a separate version for every year from 1947 to 1970, you should clearly determine the desired year before making your selection.

How do I select and install a B plate for the VW Bus T2?

With this B plate, selection mainly focuses on the “B” marking, the aluminium material and the desired year.

• Determine the desired year: Before making your selection, establish exactly which year between 1947 and 1970 should be displayed on your B plate.
• Check the product designation: Make sure the selected version carries the “B” marking together with the year you actually require.
• Compare the existing plate: If a nationality plate is already present, compare its marking, year and version with the desired variant.
• Handle the aluminium plate carefully: When handling and installing the plate, take care not to bend it unnecessarily or damage its visible surface.

The actual fastening should be based on the existing mounting situation on the vehicle. Before fitting the plate, therefore check how an existing plate or the intended mounting position is configured.

Which B plate fits my VW Bus T2?

Selecting the appropriate B plate in this category primarily depends on the desired year. The listed products are “B” nationality plates made from aluminium for the individual years from 1947 through to 1970. Each year is listed as a separate version and can therefore be selected specifically. You should first determine which year you want to use for your VW Bus T2 and then compare it with the respective product designation. Further significant technical differences are not the main focus of the listed variants. Selection therefore centres on the “B” marking, the aluminium construction and the respective year displayed on the nationality plate.